IP-SIP Full-duplex Panphone Series C

Posted: November 17, 2020

Anti-Vandalic IP-SIP intercom with CSIP Card

Anti-vandalism intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use.

It has the same functionalities of the IP Full-duplex Panphone Series 4 with different format of external presentation. It is equipped for a surface installation, it has a treated aluminum box, resistant baked paint, hermetic seal, security screws and mechanical push buttons.

It allows automatic dialing to (PBX) IP-SIP extension standard through a mechanical press button.

The IP Full-duplex Panphone Series C are fully POE with enhanced audio characteristics like: high-quality audio, full duplex communication, echo canceller, ambient noise reduction, and more.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

It is available a version with Color Camera that allows video calls and versions with Card Reader to facilitate access where is required.

It has activation relays (door opening) for remote use with a dial PIN code or in the same device with proximity card or QR code (camera version), for which schedules and time can be set.

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

Its physical characteristics also offer high strength and durability, allowing to be used outdoors to face the climet changes. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments among others (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

Available similar versions of the product in different colors (Red and Yellow). Please go to Emergency SOS Panphone section.

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface
1 Button
With IP color camera
With Card reader
With IP Camera and card reader

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP of PBX centrales IP with SIP standard
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by RFID (reader version) and QR code (camera version).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
Resistant anti-vandal case for indoor or outdoor for environmental conditions.
Illuminated indication (LED) in call status.
Extra IP port for connection of other devices.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

IP-SIP Full-duplex Panphone Series C

Reference	C510
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No
Lector de Tarjeta	No

IP-SIP Full-duplex Panphone Series C with Color Camera

Reference	C511
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes
Lector de Tarjeta	No

IP-SIP Full-duplex Panphone Series C with Card Reader

Reference	C512
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No
Lector de Tarjeta	Yes

IP-SIP Full-duplex Panphone Series C with Card Reader and Color Camera

Reference	C513
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes
Card Reader	Yes

Centralized access control for multiple sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Tourist rental
Intercoms for operating rooms and hospitals, etc.
Public address system

Datasheet ENG

Emergency-SOS IP-SIP Full-duplex Panphone

Posted: November 17, 2020

Anti-Vandalic IP-SIP intercom for Emergencies with CSIP Card

Anti-vandalism intercom for IP-SIP extension standard, with quality audio and full duplex communication, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use, for information and emergency uses.

They are equipment for a surface installation, it has a treated aluminum box, resistant baked paint, hermetic seal, security screws and mechanical push buttons.

It allows automatic dialing to (PBX) IP-SIP extension standard through a mechanical press button.

Versions of Emergency-SOS IP-SIP Full-duplex Panphone are available in different colors for different applications, services or intercom projects: Yellow (Information) and Red (Emergency or SOS).

The Emergency-SOS IP Full-duplex Panphone are fully POE with enhanced audio characteristics like: high-quality audio, full duplex communication, echo canceller, ambient noise reduction, and more.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

It is available a version with Color Camera that allows videocalls. It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

The Emergency-SOS version is available to comply with the CTE SUA9 / SI 3-7 building standard.

Its physical characteristics also offer high strength and durability, allowing to be used outdoors to face the climet changes. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments among others (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface
1 Button
With IP color camera
Yellow and Red

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP of PBX centrales IP with SIP standard
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
Braille Label.
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by QR code (camera version).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
Resistant anti-vandal case for indoor or outdoor for environmental conditions.
Illuminated indication (LED) in call status.
Extra IP port for connection of other devices.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

Emergency-SOS IP-SIP Full-duplex Panphone IP-SIP

Referencia	C510-A-E	C510-R-E
Color	Yellow RAL 1023*	Red RAL 3020*
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No
Accessibility	Braille and light indication (Led) for call status
Comply with CTE SUA9/SI 3-7	Yes

Emergency-SOS IP-SIP Full-duplex Panphone, with Color Camera

Reference	C511-A-E	C511-R-E
Color	Yellow RAL 1023*	Red RAL 3020*
Format	Surface
Button or Numeric Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes
Accessibility	Braille and light indication (Led) for call status
Comply with CTE SUA9/SI 3-7	Yes

Centralized access control for multiple sites or doors.
For attended or unattended gateways
Remote sites and of difficult access.
Parking and tolls
Gas stations, unattended service stations
For parking space
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines

Datasheet ENG

IP-SIP Full-Duplex Panphone Series 4

Posted: November 17, 2020

Anti-Vandalic IP-SIP intercom with CSIP Card

Anti-vandalism intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with piezoelectric switches, for outdoor or indoor use.

The IP-SIP Panphones Series 4 (Full-duplex) are fully POE with enhanced audio characteristics like: high-quality audio, full duplex communication, echo canceller, ambient noise reduction, and more.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

Now available IP Panphone versions with Color Camera that allows video calls and versions with Card Reader to facilitate access where is required.

It has activation relays (door opening) for remote use or in the same device with a dial PIN code (keypad version), proximity card or QR code (camera version), for which schedules and time can be set.

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

It has a IP-55 casing and its installation versatility, they can be used outdoors and in hygienic environments that require constant cleaning. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments and other types of building (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface or Flush mount
Numeric keyboard or button
With IP Color Camera
With Card reader
With Camera and card reader
Only PCB CSIP Card

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP of PBX centrales IP with SIP standard.
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by PIN code dialing (keypad version), RFID (reader version) and QR code (camera version).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
IP-55 Resistant anti-vandal case for indoor or outdoor for environmental and hygenic conditions.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

IP-SIP Full-duplex Panphone

Reference	4510	4520	4530	4540
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	No
Card Reader	No

IP-SIP Full-duplex Panphone with Proximity Card Reader

Reference	4512	4522	4523	4542
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	No
Card Reader	Yes

IP-SIP Full-duplex Panphone with Color Camera

Reference	4511	4521	4531	4541
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	Yes
Card Reader	No

IP-SIP Full-duplex Panphone with Card Reader and Camera

Reference	4513	4523	4533	4543
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	Yes
Card Reader	Yes

Centralized access control for multiple sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Tourist rental
Intercoms for operating rooms and hospitals, etc.
Public address system

Datasheet ENG

IP-SIP Security Panphone

Posted: March 21, 2022

Anti-Vandalic Security IP-SIP intercom with CSIP Card

Anti-vandal Security intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with piezoelectric Call button, for outdoor or indoor use.

It is the Panphone anti-vandal security version, with a completely flat surface without holes, for specific security applications or applications that do not require a camera or card reader in the same device.

It allows automatic dialing to an IP-SIP PBX’s extension by touching the piezoelectric call button.

The IP Security Panphone are fully POE with enhanced audio characteristics like: high-quality audio, full duplex communication, echo canceller, ambient noise reduction, and more.

It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

It is possible to activate the relay by code dialing from a remote extension or by external devices for which schedules and times can be set.

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

Thanks to its IP-55 casing and its installation versatility, they can be used outdoors and in hygienic environments that require constant cleaning.

It is perfect for security applications among other access applications, for example, exterior doors for buildings or houses, prisons, multiple office locations or doors, garages and hospital environments (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

FeaturesProduct VersionsCommon uses

General features:

Handsfree intercom with hanging and automatic hang-up
Flat surface without holes for flush mounting
A piezo-electric call button
Direct Connection to IP SIP of PBX centrales IP with SIP standard.
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by PIN code dialing (with external version), RFID (with external reader) and QR code (with external camera).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
IP-55 Resistant anti-vandal case for indoor or outdoor for environmental and hygenic conditions.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

IP-SIP Security Panphone

Reference	5530
Format	Flush Mount
Button or piezo-electric Keyboard	1 button
Dimensions (HxWxD) mm	External 217,41×128,8×8,6 Interior 180×91,40×30
Camera	No
Card Reader	No

Penitentiary Centers.
Centralized access control for multiple sites or doors.
Unattended gatehouses or guardhouses.
Hospital environment, accesses, operating
rooms, etc.
Assistance zones in buildings and hotels.
Parking barriers and Tollgates.
Evelators
Roadside Emergency Callers (SOS points)
Public transportation stations
Gas stations, unattended service stations
HealthCare and geriatric environments.
Accessibility systems for reduced mobility people.
Vending machines
Public address system

Datasheet ENG

CSIP & CSIP 4G/LTE Card

Posted: May 23, 2022

CSIP & CSIP 4G/LTE Card

Intercom Card for standard IP-SIP extension, with quality audio and full duplex communication

It allows automatic dialing to an IP-SIP PBX’s extension by touching the external keyboard or call button.

The “IP-SIP only” or “IP-SIP plus 4G/LTE” communication versions are available with the possibility of connecting via IP and/or via the 4G/LTE mobile network, respectively.

The CSIP and CSIP 4G/LTE Cards are fully POE with enhanced audio characteristics like: high- quality audio, full duplex communication, echo canceller, ambient noise reduction, and more.

It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

It has activation relays (door opening) for remote use or in the same device with a dial PIN code (external keypad), proximity card (external card reader) or QR code (external camera), for which schedules and time can be set.

It has specific pin connectors for external devices such as keyboard, pushbutton, loudspeaker and proximity card reader.

Allows the connection of an IP camera to be used in IP video calls or for connection to centralized or remote video surveillance systems.

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, indicators and other devices.

It is possible to attach it an optional OPTO Card that includes additionally 4 digital inputs and 1 relay output.

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.
They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

Any customization is possible, since the integrated PCB card allows installation in any preferred device, box, or structure, allowing its use in multiple applications and projects. It can be a component within a set of more complex systems.
It can be used to develop products or manufacture solutions using the branding of the integrator.

FeaturesProduct VersionsCommon uses

Available Versions*:

IP-SIP
IP-SIP & 4G/LTE

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP standard PBX
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English.
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by PIN code dialing (external keypad), RFID (external card reader) and QR code (external camera).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with external camera.
PCB Card Format for any Case, device or structure.
Illuminated indication (LED) in call status.
Specific connectors for push button, Keyboard, Proximity Card reader and IP Camera.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

CSIP Card

Reference	CSIP
Communication Protocol	IP
Mobile Network Communication	No
Frequency Bands LTE-TDD,LTE-FDD, UMTS/HSPA+, GSM/GPRS/EDGE 850/900/1800/1900MHz	No
Dimensions (HxWxD) mm	119x85x16,9 mm

CSIP 4G/LTE Card

Reference	CSIP 4G/LTE
Communication Protocol	IP and/or 4G/LTE
Comunicación por Red móvil	Yes, 2G/3G/4G
Frequency Bands LTE-TDD,LTE-FDD, UMTS/HSPA+, GSM/GPRS/EDGE 850/900/1800/1900MHz	Yes
Dimensions (HxWxD) mm	119x 85x 18,5 mm

Centralized access control for multiple sites or doors.
Unattended gatehouses or guardhouses.
Healthcare and geriatric environments.
Assistance zones in buildings and hotels.
Parking barriers and Tollgates.
Elevators and Kiosks
Emergency intercom on the high way (SOS points)
Public transportation stations
Non attended Fuel stations, self-service.
Accessibility systems for reduced mobility people.
Intercom in prisons
Vending machines
Tourist rental
Intercoms for operating rooms and hospitals, etc.
Public address system

Datasheet ESP

Datasheet ENG

WIFI Full-duplex Panphone Series C

Posted: February 14, 2022

Anti-Vandalic WIFI intercom with CSIP Card

Anti-vandalism WIFI intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use.

With the same functionalities of the Panphone IP-SIP Series C Full duplex, adding WIFI functionality to facilitate installation in places that are difficult to access with conventional wiring. It is equipped for a surface installation, it has a treated aluminum box, resistant baked paint, hermetic seal, security screws and mechanical push buttons.

It allows automatic dialing to (PBX) IP-SIP extension standard through a mechanical press button.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

It is available a version with Color Camera that allows video calls and versions with Card Reader to facilitate access where is required.

It has activation relays (door opening) for remote use with a dial PIN code or in the same device with proximity card or QR code (camera version), for which schedules and time can be set.

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

Its physical characteristics offer high resistance and durability, allowing its use in outdoor or indoor climatic events at any point with Wi-Fi network coverage. Its approximate wireless range is 100 meters in open spaces and 50 in closed spaces. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments among others (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

Available similar versions of the product in different colors (Red and Yellow). Please go to Emergency SOS Panphone section.

FeaturesProduct VersionsCommon uses

Versions*:

Surface, 1 Button
With IP color camera
With Proximity Card Reader
With IP color camera & Proximity Card Reader

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP of PBX centrales IP with SIP standard vía WIFI
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
WIFI IEE 802.11 b,g,n, at 2,4 GHz/300Mbps
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by RFID (reader version) and QR code (camera version).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
Resistant anti-vandal case for indoor or outdoor for environmental conditions.
Illuminated indication (LED) in call status.
Extra IP port for connection of other devices.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

WIFI Full-duplex Panphone Series C

Reference	C514
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No
Card Reader	No

WIFI Full-duplex Panphone Series C with Proximity Card Reader

Reference	C515
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No
Card Reader	Yes

WIFI Full-duplex Panphone Series C with Color Camera

Reference	C516
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes
Card Reader	No

WIFI Full-duplex Panphone Series C with Color Camera and Proximity Card Reader

Reference	C517
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes
Card Reader	Yes

Centralized access control for multiple sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Tourist rental
Intercoms for operating rooms and hospitals, etc.
Public address system

Emergency-SOS WIFI Full-duplex Panphone

Posted: February 14, 2022

Anti-Vandalic WIFI intercom for Emergencies with CSIP Card

Anti-vandalism WIFI intercom for IP-SIP extension standard, with quality audio and full duplex communication, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use, for information and emergency uses.

With the same functionalities of the Panphone IP-SIP Series C Full duplex, adding WIFI functionality to facilitate installation in places that are difficult to access with conventional wiring. They are equipment for a surface installation, it has a treated aluminum box, resistant baked paint, hermetic seal, security screws and mechanical push buttons.

It allows automatic dialing to (PBX) IP-SIP extension standard through a mechanical press button.

Versions of Emergency-SOS WIFI Full-duplex Panphone are available in different colors for different applications, services or intercom projects: Yellow (Information) and Red (Emergency or SOS).

The Emergency-SOS IP Full-duplex Panphone are fully POE with enhanced audio characteristics like: high-quality audio, full duplex communication, echo canceller, ambient noise reduction, and more.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

It is available a version with Color Camera that allows videocalls. It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

The Emergency-SOS version is available to comply with the CTE SUA9 / SI 3-7 building standard.

Its physical characteristics offer high resistance and durability, allowing its use in outdoor or indoor climatic events at any point with Wi-Fi network coverage. Its approximate wireless range is 100 meters in open spaces and 50 in closed spaces. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments among others (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

FeaturesProduct VersionsCommon uses

Versions*:

Surface, 1 Button
With IP color camera
Yellow and Red

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP of PBX centrales IP with SIP standard via WIFI
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
WIFI IEE 802.11 b,g,n, at 2,4 GHz/300Mbps
Braille Label.
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by QR code (camera version).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
Resistant anti-vandal case for indoor or outdoor for environmental conditions.
Illuminated indication (LED) in call status.
Extra IP port for connection of other devices.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

Emergency-SOS IP-SIP Full-duplex Panphone IP-SIP

Referencia	C514-E-A	C514-E-R
Color	Yellow RAL 1023*	Red RAL 3020*
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No
Accessibility	Braille and light indication (Led) for call status
Comply with CTE SUA9/SI 3-7	Yes

Emergency-SOS IP-SIP Full-duplex Panphone, with Color Camera

Reference	C516-E-A	C516-E-R
Color	Yellow RAL 1023*	Red RAL 3020*
Format	Surface
Button or Numeric Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes
Accessibility	Braille and light indication (Led) for call status
Comply with CTE SUA9/SI 3-7	Yes

Centralized access control for multiple sites or doors.
For attended or unattended gateways
Remote sites and of difficult access.
Parking and tolls
Gas stations, unattended service stations
For parking space
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines

WIFI Full-Duplex Panphone Series 4

Posted: February 14, 2022

Anti-Vandalic WIFI intercom with CSIP Card

Anti-vandalism WIFI intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with piezoelectric switches, for outdoor or indoor use.

With the same functionalities of the IP-SIP Series 4 Full-duplex Panphone, adding WIFI functionality to facilitate installation in places that are difficult to access with conventional wiring. They are equipment for surface or flush mount installation.

It allows automatic dialing to an IP-SIP PBX’s extension by touching the call button or dialing on the keyboard.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.729, g.711a/u, GSM and OPUS that allows bandwidth adjustment).

Now available IP Panphone versions with Color Camera that allows video calls and versions with Card Reader to facilitate access where is required.

It has activation relays (door opening) for remote use or in the same device with a dial PIN code (keypad version), proximity card or QR code (camera version), for which schedules and time can be set.

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

Its installation versatility and IP-55 casing allow it to be used outdoors and in hygienic environments due to its ease of cleaning at any point with Wi-Fi network coverage. Its approximate wireless range is 100 meters in open spaces and 50 in closed spaces. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments and other types of building (see common uses).

Additionally, it facilitates maintenance work since it allows remote management and testing with public IP or through VPN.

They can be integrated with other external platforms through connection to databases, communication protocols and/or remote management or through APIs for special projects.

FeaturesProduct VersionsCommon uses

Versions*:

Surface or Flush mount
Numeric keyboard or button
With IP Color Camera
With Card reader
With Camera and card reader

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to IP SIP of PBX centrales IP with SIP standard via WIFI.
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: g.722, g.726, g.729, g.711a/u, GSM and OPUS.
WIFI IEE 802.11 b,g,n, at 2,4 GHz/300Mbps
Call status audio messages (Door open, call in progress, close door, among others) in Spanish and English
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Door opening/relay activation locally by PIN code dialing (keypad version), RFID (reader version) and QR code (camera version).
Programming of relay activation times and periods for PIN numeric codes, RFID and QR
Up to 250 users for PIN, RFID or QR.
Supports Video Call and Video Streaming with camera version.
IP-55 Resistant anti-vandal case for indoor or outdoor for environmental and hygenic conditions.
Wiring required, UTP and AC Power in cases of non-POE installation.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
TLS Coding
DHCP support
RS-485, MODBUS (Scada) protocols support
Administration, local and remote configuration via web interface and SMNP, either by Public IP or via VPN
Remote audio test (speaker and mic).
Traffic Log Management and accesses, exportable to .xls, .csv and .pdf.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs or external DDBB.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

WIFI Full-duplex Series 4 Panphone

Reference	4514	4524	4534	4544
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	No
Card Reader	No

WIFI Full-duplex Series 4 Panphone with Proximity Card Reader

Reference	4515	4525	4535	4545
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	No
Card Reader	Yes

WIFI Full-duplex Series 4 Panphone with Color Camera

Reference	4516	4526	4536	4546
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	Yes
Card Reader	No

WIFI Full-duplex Series 4 Panphone with Card Reader and Camera

Reference	4517	4527	4537	4547
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	Yes
Card Reader	Yes

Centralized access control for multiple sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Tourist rental
Intercoms for operating rooms and hospitals, etc.
Public address system

WIFI Security Panphone

Posted: March 21, 2022

Anti-Vandalic Security WIFI intercom with CSIP Card

Anti-vandal and Security WIFI intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with piezoelectric Call button, for outdoor or indoor use.

It is the Panphone anti-vandal security version, with a completely flat surface without holes, for specific security applications or applications that do not require a camera or card reader in the same device. With WIFI functionality to facilitate installation in places that are difficult to access with conventional wiring.

It allows automatic dialing to an IP-SIP PBX’s extension by touching the piezoelectric call button.

It has enhanced audio features like full duplex audio communication, echo canceller, ambient noise reduction, and more. It allows up to 5 independent SIP accounts and it is possible to select among multiple codecs (g.722, g.726, g.711, GSM and OPUS that allows bandwidth adjustment).

It also includes the ability to connect to external devices (biometric readers, proximity, etc.) and manage I/O inputs and outputs for LEDs, Indicators and other devices, with the option of adding more digital inputs and extra relay output with OPTO card.

Thanks to its IP-55 casing and its installation versatility, they can be used outdoors and in hygienic environments that require constant cleaning at any point with Wi-Fi network coverage. Its approximate wireless range is 100 meters in open spaces and 50 in closed spaces.

It is perfect for security applications among other access applications, for example, exterior doors for buildings or houses, prisons, multiple office locations or doors, garages and hospital environments (see common uses).

Additionally, it allows remote management and testing facilitating maintenance work.

It is possible its integration with other platforms through APIs as an option, ideal for special projects.

FeaturesProduct VersionsCommon uses

General features:

Handsfree intercom with hanging and automatic hang-up
Flat surface without holes for flush mounting
A piezo-electric call button
Direct Connection to IP SIP of PBX centrales IP with SIP standard via WIFI.
Up to 5 independent IP-SIP accounts.
Improved audio quality, Full Duplex audio, Echo Canceller and Ambient Noise Reduction.
Codecs: OPUS; g722, g726, g711 and GSM.
WIFI IEE 802.11 b,g,n, at 2,4 GHz/300Mbps
Call status audio messages (Door open, call in progress, close door, among others)
Remote administration via web interface.
Plate with 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
IP-55 Resistant anti-vandal case for indoor or outdoor for environmental and hygenic conditions.
Approximate wireless range of 100 meters in open spaces and 50 in closed spaces.
Power only wiring.
Winegard ports for other devices (biometrics, readers, etc.)
LED ports for indicators.
Remote audio test (speaker and mic)
Call traffic logs.
Option for Additional OPTO card with 4 digital inputs and 1 relay output.
Option for integration with third party APIs.
Option for event notification via SIP call.
It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

*Note: visit ‘ product’s versions’ to check references.

WIFI Security Panphone

Reference	5534
Format	Flush Mount
Button or piezo-electric Keyboard	1 button
Dimensions (HxWxD) mm	External 217,41×128,8×8,6 Interior 180×91,40×30
Camera	No
Card Reader	No

Penitentiary Centers.
Centralized access control for multiple sites or doors.
Unattended gatehouses or guardhouses.
Hospital environment, accesses, operating
rooms, etc.
Assistance zones in buildings and hotels.
Parking barriers and Tollgates.
Evelators
Roadside Emergency Callers (SOS points)
Public transportation stations
Gas stations, unattended service stations
HealthCare and geriatric environments.
Accessibility systems for reduced mobility people.
Vending machines
Public address system

Analog Panphone Series C

Posted: September 14, 2017

Antivandalic Analog Intercom

Anti-vandalism intercom for standard Analog extension, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use.

It is equipped for a surface installation, it has a treated aluminum box, resistant baked paint, hermetic seal, security screws and mechanical push buttons. It allows automatic dialing to standard PBX extension through a mechanical press button and can be used as an intercom and as an access control.

In addition, it is available another version with Camera with different colour, that allows videocalls.

It has 2 dry contact relays that work independently, for electric door’s connection, which can be activated from remote extension or in the same keyboard. It can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected.
The version for a specific area is available to comply with the construction standard CTE SUA9 / SI 3-7.

Available similar versions of the product in different colors (Red and Yellow). Please go to Emergency SOS Panphone section.

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface
1 Button
With IP color camera

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to analog of PBX EXT standard
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Resistant anti-vandal case format, for indoor or outdoor for environmental conditions.
Illuminated indication (LED) in call status.
Wiring, needs 2 wires and AC power, in case a version with camera, so add 1 UTP
It works with all PBX that has a conventional analog EXT.

*Note: visit ‘ product’s versions’ to check references.

Analog Panphone Series C without Camera

Reference	C006
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	No

Analog Panphone Series C with Camera

Reference	C008
Color	Matt Grey RAL 9006
Format	Surface
Button or Keyboard	1 button
Dimensions (HxWxD) mm	188×115,9×40
Color Camera	Yes

Centralized access control for different sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Intercoms for operating rooms and hospitals, etc.
Public address system

Datasheet ENG

Emergency-SOS Analog Panphone

Posted: October 22, 2019

Antivandalic Analog Intercom for Emergencies

Anti-vandalism intercom for standard Analog extension, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use.

It is equipped for a surface installation, it has a treated aluminum box, resistant baked paint, hermetic seal, security screws and mechanical push buttons. It allows automatic dialing to standard PBX extension through a mechanical press button and can be used as an intercom and as an access control.

Versions of Panphone Emergency SOS are available in different colors for different applications, services or intercom projects: Yellow (Information) and Red (Emergency or SOS).

In addition, it is available another version with Camera with different colour, that allows videocalls.

It has 2 dry contact relays that work independently, for electric door’s connection, which can be activated from remote extension or in the same keyboard. It can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected.

The version for a specific area is available to comply with the construction standard CTE SUA9 / SI 3-7.

Its physical characteristics also offer high strength and durability, allowing to be used outdoors to face the climet changes. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments among others (see common uses).

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface
1 Button
With IP color camera
Yellow and Red

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to analog of PBX EXT standard
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Resistant anti-vandal case format, for indoor or outdoor for environmental conditions.
Illuminated indication (LED) in call status.
Wiring, needs 2 wires and AC power, in case a version with camera, so add 1 UTP
It works with all PBX that has a conventional analog EXT.

*Note: visit ‘ product’s versions’ to check references.

Emergency-SOS Analog Panphone without Camera

Reference	C006-A-E	C006-R-E
Color	Yellow RAL 1023*	Red RAL 3020*
Format	Surface
Button or Keyboard	1 button
Dimensiones (HxWxD) mm	188×115,9×40
Color Camera	No
Accessibility	Braille and light indication (Led) for call status
Comply with CTE SUA9/SI 3-7	Yes

Emergency-SOS Analog Panphone with Camera

Reference	C008-A-E	C008-R-E
Color	Yellow RAL 1023*	Red RAL 3020*
Formato	Surface
Button or Keyboard	1 button
Dimensiones (HxWxD) mm	188×115,9×40
Color Camera	Yes
Accessibility	Braille and light indication (Led) for call status
Comply with CTE SUA9/SI 3-7	Yes

Centralized access control for different sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Intercoms for operating rooms and hospitals, etc.
Public address system

Datasheet ENG

Analog Panphone Series 4

Posted: February 5, 2016

Anti-Vandalic Analog intercom

Anti-vandalism intercom for standard Analog extension, high resistance and durability with piezoelectric switches, for outdoor or indoor use.

It allows automatic dialing to PBX extension standard through a mechanical press button or the keyboard and can be used as an intercom and as an access control with a dialing code in case of keyboard type.

It is available Analog Panphone series 4 type with keyboards and with press button and if it has IP color camera or not.

It has 2 dry contact relays that work independently, for electric door’s connection, which can be activated from remote extension or in the same keyboard. It can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected.

It has a IP-55 casing and its installation versatility, they can be used outdoors and in hygienic environments that require constant cleaning. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments and other types of building (see common uses).

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface or Flush Mount
Numeric keyboard or button
With IP color camera

General features:

Handsfree intercom with hanging and automatic hang-up
Direct Connection to analog of PBX EXT standard
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Anti-vandalism IP-55, for indoor or outdoor for hygienic environments or environmental conditions.
Keyboard type allowed open doors with code.
Wiring, needs 2 wires and AC power, in case a version with camera, so add 1 UTP
It works with all PBX that has a conventional analog EXT.

*Note: visit ‘ product’s versions’ to check references.

Analog Panphone Series 4 without Camera

Reference	4006	4003	4018	4015
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	No

Analog Panphone Series 4 with Camera

Reference	4008	4005	4020	4017
Format	Surface		Flush Mount
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30
Color Camera	Yes

Centralized access control for different sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Intercoms for operating rooms and hospitals, etc.
Public address system

Datasheet ENG

Analog Security Panphone

Posted: March 21, 2022

Anti-Vandalic Analog Security intercom

Anti-vandal Security intercom for standard Analog extension, high resistance and durability with piezoelectric with piezoelectric Call button, for outdoor or indoor use.

It is the Panphone anti-vandal security version, with a completely flat surface without holes, for specific security applications or applications that do not require a camera or card reader in the same device.

It allows automatic dialing to PBX standard extension by touching the piezoelectric call button.

It has 2 dry contact relays that work independently, for electric door’s connection, which can be activated from remote extension. It can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected.

Thanks to its IP-55 casing and its installation versatility, they can be used outdoors and in hygienic environments that require constant cleaning.

It is perfect for security applications among other access applications, for example, exterior doors for buildings or houses, prisons, multiple office locations or doors, garages and hospital environments (see common uses).

FeaturesProduct VersionsCommon uses

General features:

Handsfree intercom with hanging and automatic hang-up
Flat surface without holes for flush mounting
A piezo-electric call button
Direct Connection to analog of PBX EXT standard
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any extension.
Anti-vandalism IP-55, for indoor or outdoor for hygienic environments or environmental conditions.
Wiring, needs 2 wires and AC power, in case a version with camera, so add 1 UTP
It works with all PBX that has a conventional analog EXT.

*Note: visit ‘ product’s versions’ to check references.

Analog Security Panphone

Reference	5030
Format	Flush Mount
Button or piezo-electric Keyboard	1 button
Dimensions (HxWxD) mm	External 217,41×128,8×8,6 Interior 180×91,40×30
Camera	No
Card Reader	No

Centralized access control for different sites or doors.
For attended or unattended gateways
Care and geriatric environments.
Parking and tolls
Gas stations, unattended service stations
For evelators
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Vending machines
Intercoms for operating rooms and hospitals, etc.
Public address system

GSM Security Panphone

Posted: March 21, 2022

Anti-Vandalic Security GSM intercom

Anti-vandal and Security intercom for Mobile Cellular line, high strength and durability with with piezoelectric Call button, for outdoor or indoor use.

It is the Panphone anti-vandal security version, with a completely flat surface without holes, for specific security applications or applications that do not require a camera or card reader in the same device.

It is ideal for establishments where wiring is not possible or required (voice or data), allowing greater versatility and fast in installation.

Dialing automatic to a phone number by pressing the button through the cellular mobile network. It can be used as an intercom and as a remote access control.

It allows dialing up to 10 pre-configured numbers that are dialed sequentially in case there is an error in the call or no answer.

It has 2 dry contact relays that operate independently, for connection of electric doors, which can be activated from remote telephone (with code, SMS or missed call). It can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected. It can generate alarms by calling a telephone number with the activation of some sensor input.

Now GSM intercoms can have pre-recorded messages that indicate the status or activity. These messages can be in several languages, Spanish (Spanish), English, Portuguese and Catalan, are available, other languages upon request.

Thanks to its IP-55 housing, it can be used outdoors in places inhospitable and in hygienic environments that require constant cleaning.

It is perfect for security applications among other access applications, for example, exterior doors for buildings or houses, prisons, multiple office locations or doors, garages and hospital environments (see common uses).

FeaturesProduct VersionsCommon uses

General features:

Handsfree intercom with hanging and automatic hang-up
Flat surface without holes for flush mounting
A piezo-electric call button
Direct connection via telephone by Cellular Mobile Line.
Sequence dialing to 10 programmed numbers.
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any telephone or by making a call or SMS
IP-55 Resistant anti-vandal case for indoor or outdoor for environmental and hygenic conditions.
Contact input (sensors, alarms, etc.) to make a call.
Wiring, AC power

It works with the most common mobile cellular network frequencies (850, 900, 1800 and 1900 Mhz), which allows its use in coverage areas of different networks.

*Note: Note, visit ‘ product’s versions’ to check references.

GSM Security Panphone

Reference	5330
Format	Flush Mount
Button or piezo-electric Keyboard	1 button
Dimensions (HxWxD) mm	External 217,41×128,8×8,6 Interior 180×91,40×30
Camera	No
Card Reader	No

Control de acceso para distintas sedes o puertas.
Garitas o porterías remotas desatendidas.
Sedes remotas y de difícil acceso.
Barreras de parking y peajes.
Gasolineras, estaciones de servicio desatendidas.
Garajes.
Ascensores.
Comunicadores de emergencia en carreteras (puntos SOS).
Estaciones de transporte publico.
Sistemas de accesibilidad para personas de movilidad reducida.
Zonas Refugio o de Emergencia en hoteles, hospitales y otro tipo de edificaciones.
Maquinas de vending.

GSM Card

Posted: May 31, 2022

Intercom Card for GSM Mobile Cellular line

Intercom Card for standard Mobile Cellular line

Automatic dial to a phone number by pressing external button or keyboard through the cellular mobile network. It can be used as intercom or remote access control.

It is ideal for establishments where wiring is not possible or required (voice or data), allowing greater versatility and fast in installation.

It allows dialing up to 10 pre-configured numbers that are dialed sequentially in case there is an error in the call or no answer.

It has specific pin connectors for external devices such as keyboard, pushbutton, loudspeaker and proximity card reader.

It has 2 dry contact relays that operate independently, for connection of electric doors, which can be activated from remote telephone (with code, SMS or missed call). They can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected. It can generate alarms by calling a telephone number with the activation of some sensor input.

GSM intercom cards can have pre-recorded messages that indicate the status or activity. These messages can be in several languages, Spanish (Spanish), English, Portuguese and Catalan, are available, other languages upon request.

It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments and so on (see common uses).

Any customization is possible , since the integrated PCB card allows installation in any preferred device, box, or structure, allowing its use in multiple applications and projects. It can be a component within a set of more complex systems.
It can be used to develop products or manufacture solutions using the branding of the integrator.

FeaturesProduct VersionsCommon uses

Available Versions*:

GSM PCB Card

General features:

Handsfree intercom with hanging and automatic hang-up
Direct connection via telephone by Cellular Mobile Line.
Connectors for external devices such as keyboard, pushbutton, loudspeaker and proximity card reader.
Sequence dialing to 10 programmed numbers.
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any telephone or by making a call or SMS
Opening doors by dailing code from external keyboard
PCB Card Format for any Case, device or structure.
Loudspeaker included of 1W output
Contact input (sensors, alarms, etc.) to make a call.
Wiring, AC power
It works with the most common mobile cellular network frequencies (850, 900, 1800 and 1900 Mhz), which allows its use in coverage areas of different networks.

*Note: visit ‘product’s versions’ to check references.

GSM PCB Card

Reference	4039
Communication Protocol	GSM
Mobile Network Communication	Yes
Frequency Bands 850, 900, 1800 y 1900 Mhz	Yes
Dimensions (HxWxD) mm	100x85x15 mm

Centralized access control for multiple sites or doors.
Difficult access Remote sites.
Unattended gatehouses or guardhouses.
Parking barriers and Tollgates.
Healthcare and geriatric environments
Gas stations, unattended service stations
For elevators and kiosks
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Intercoms for operating rooms and hospitals, etc.
Vending machines

GSM Panphone Series 4

Posted: February 5, 2016 | 0 comments

Anti-Vandalic GSM intercom

Anti-vandalism intercom for Mobile Cellular line, high strength and durability with with piezoelectric switches and surface installation, for outdoor or indoor use.

It is ideal for establishments where wiring is not possible or required (voice or data), allowing greater versatility and fast in installation. Dialing automatic to a phone number by pressing the button through the cellular mobile network. It can be used as an intercom and as a remote access control.

It allows dialing up to 10 pre-configured numbers that are dialed sequentially in case there is an error in the call or no answer.

It has 2 dry contact relays that operate independently, for connection of electric doors, which can be activated from remote telephone (with code, SMS or missed call). It can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected. It can generate alarms by calling a telephone number with the activation of some sensor input.

Now GSM intercoms can have pre-recorded messages that indicate the status or activity. These messages can be in several languages, Spanish (Spanish), English, Portuguese and Catalan, are available, other languages upon request.

It has an IP-55 housing, it can be used outdoors in places inhospitable. It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments and so on (see common uses).

FeaturesProduct VersionsCommon uses

Available Versions*:

Surface or Flush Mount
Numeric keyboard or button
Only PCB Card

General features:

Handsfree intercom with hanging and automatic hang-up
Direct connection via telephone by Cellular Mobile Line.
Sequence dialing to 10 programmed numbers.
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any telephone or by making a call or SMS
IP-55 Resistant anti-vandal case for indoor or outdoor for environmental and hygenic conditions.
Contact input (sensors, alarms, etc.) to make a call.
The Keyboard version allows to open doors through a code
Wiring, AC power

It works with the most common mobile cellular network frequencies (850, 900, 1800 and 1900 Mhz), which allows its use in coverage areas of different networks.

*Note: Note, visit ‘ product’s versions’ to check references.

GSM Panphone Series 4

Reference	4040	4041	4042	4043	4039
Formato	Surface		Flush Mount		PCB Card
Button or piezo-electric Keyboard	1 button	Keyboard	1 button	Keyboard	N/A
Dimensions (HxWxD) mm	187x104x32		External 217,41×128,8×8,6 Internal 180×91,40×30		100x85x15

Control de acceso para distintas sedes o puertas.
Garitas o porterías remotas desatendidas.
Sedes remotas y de difícil acceso.
Barreras de parking y peajes.
Gasolineras, estaciones de servicio desatendidas.
Garajes.
Ascensores.
Comunicadores de emergencia en carreteras (puntos SOS).
Estaciones de transporte publico.
Sistemas de accesibilidad para personas de movilidad reducida.
Zonas Refugio o de Emergencia en hoteles, hospitales y otro tipo de edificaciones.
Maquinas de vending.

Datasheet ENG

GSM 4G/LTE Card

Posted: March 7, 2023

Intercom Card for GSM 4G/LTE Mobile Cellular line

Intercom Card for standard Mobile Cellular line

Automatic dial to a phone number by pressing external button or keyboard through the cellular mobile network (GSM, WCDMA o 4G/LTE). It can be used as intercom or remote access control.

It is ideal for establishments where wiring is not possible or required (voice or data), allowing greater versatility and fast in installation.

It allows dialing up to 10 pre-configured numbers that are dialed sequentially in case there is an error in the call or no answer.

It has specific pin connectors for external devices such as keyboard, pushbutton, loudspeaker and proximity card reader.

It has 2 dry contact relays that operate independently, for connection of electric doors, which can be activated from remote telephone (with code, SMS or missed call). They can also be activated from external devices (such as card readers, biometric, proximity, etc.), since it has digital inputs to which buttons and sensors can also be connected. It can generate alarms by calling a telephone number with the activation of some sensor input.

GSM 4G/LTE intercom cards can have pre-recorded messages that indicate the status or activity. These messages can be in several languages, Spanish (Spanish), English, Portuguese and Catalan, are available, other languages upon request.

It is perfect for SOS points, access control multiple sites or doors, intercoms for gas stations, specific areas, hotels and hospital environments and so on (see common uses).

Any customization is possible , since the integrated PCB card allows installation in any preferred device, box, or structure, allowing its use in multiple applications and projects. It can be a component within a set of more complex systems.
It can be used to develop products or manufacture solutions using the branding of the integrator.

FeaturesProduct VersionsCommon uses

Available Versions*:

GSM 4G/LTE PCB Card

General features:

Handsfree intercom with hanging and automatic hang-up
Direct connection via telephone by Cellular Mobile Line (GSM, WCDMA o 4G/LTE).
Connectors for external devices such as keyboard, pushbutton, loudspeaker and proximity card reader.
Sequence dialing to 10 programmed numbers.
With 2 independent dry contact relays. Ideal for doors that activate electrically or external devices (card readers, fingerprint, etc).
Opening doors remotely (activation of relays) with dailing code from any telephone or by making a call or SMS
Opening doors by dailing code from external keyboard
PCB Card Format for any Case, device or structure.
Loudspeaker included of 1W output
Contact input (sensors, alarms, etc.) to make a call.
Wiring, AC power
It works with the most common mobile cellular networks (GSM, WCDMA o 4G/LTE), which allows its use in coverage areas of different networks.

*Note: visit ‘product’s versions’ to check references.

GSM PCB Card

Reference	GSM 4G/LTE
Communication Protocols	GSM, WCDMA, LTE-TDD y LTE-FDD
Comunicación por Red móvil	Yes
Frequency Bands GSM (Mhz)	B8 (900) y B3 (1800)
Frequency Bands WCDMA 3G (Mhz)	B1 (2100), B8 (900) y B5 (850)
Frequency Bands 4G/LTE cat 4 (Mhz)	B1 (FDD 2100), B3 (FDD 1800); B5 (FDD 850), B7 (FDD 2600); B8 (FDD 900), B20 (FDD 800DD), B38 (TDD 2600), B40 (TDD 2300) y B41 (TDD 2500)
Dimensions (HxWxD) mm	82x75x14 mm

Centralized access control for multiple sites or doors.
Difficult access Remote sites.
Unattended gatehouses or guardhouses.
Parking barriers and Tollgates.
Healthcare and geriatric environments
Gas stations, unattended service stations
For elevators and kiosks
Emergency intercom on the high way (SOS points)
Public transportation stations
Accessibility systems for reduced mobility people.
Intercom in prisons
For specific areas or emergency in hotels, hospitals and other types of builidng
Intercoms for operating rooms and hospitals, etc.
Vending machines

Intercoms, doorphones and video-doorphones

IP-SIP Intercoms

WIFI Intercoms

Analog Intercoms

GSM Intercoms

Intercom Cards

Intercom Previous Versions

IP Intercoms

IP-SIP Full-duplex Panphone Series C

Anti-Vandalic IP-SIP intercom with CSIP Card

Anti-vandalism intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use.

Available Versions*:

General features:

It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

IP-SIP Full-duplex Panphone Series C

Reference

C510

IP-SIP Full-duplex Panphone Series C with Color Camera

Reference

C511

IP-SIP Full-duplex Panphone Series C with Card Reader

Reference

C512

IP-SIP Full-duplex Panphone Series C with Card Reader and Color Camera

Reference

C513

Emergency-SOS IP-SIP Full-duplex Panphone

Anti-Vandalic IP-SIP intercom for Emergencies with CSIP Card

Anti-vandalism intercom for IP-SIP extension standard, with quality audio and full duplex communication, high resistance and durability with mechanical pushbutton and surface installation, for outdoor or indoor use, for information and emergency uses.

Available Versions*:

General features:

It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

Emergency-SOS IP-SIP Full-duplex Panphone IP-SIP

Referencia

C510-A-E

C510-R-E

Emergency-SOS IP-SIP Full-duplex Panphone, with Color Camera

Reference

C511-A-E

C511-R-E

IP-SIP Full-Duplex Panphone Series 4

Anti-Vandalic IP-SIP intercom with CSIP Card

Anti-vandalism intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with piezoelectric switches, for outdoor or indoor use.

Available Versions*:

General features:

It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

IP-SIP Full-duplex Panphone

Reference

4510

4520

4530

4540

IP-SIP Full-duplex Panphone with Proximity Card Reader

Reference

4512

4522

4523

4542

IP-SIP Full-duplex Panphone with Color Camera

Reference

4511

4521

4531

4541

IP-SIP Full-duplex Panphone with Card Reader and Camera

Reference

4513

4523

4533

4543

IP-SIP Security Panphone

Anti-Vandalic Security IP-SIP intercom with CSIP Card

Anti-vandal Security intercom for IP-SIP standard extension, with quality audio and full duplex communication, high resistance and durability with piezoelectric Call button, for outdoor or indoor use.

General features:

It works with Centrals (PBX) with Asterisk IP software and power stations such as Alcaltel, Avaya, Cisco, Elastix, Epygi, Denwa, Matrix, Nec, Panasonic, Siemens, Hiper PBX, Xorcom, Yeastar and Zycoo, and others.

IP-SIP Security Panphone

Reference

5530

CSIP & CSIP 4G/LTE Card

CSIP & CSIP 4G/LTE Card